Remove Instructions; Preparation For Installation And Wiring; Ambient Conditions - Delta BLD-E1 Series User Manual

Chapter 1 Introduction|BLD-E1 Series

1.1.5 Remove Instructions

Remove Front Cover
Step 1

1.2 Preparation for Installation and Wiring

1.2.1 Ambient Conditions

Install the brushless DC motor drive in an environment with the following conditions:
Operation
Storage
Transportation
Pollution
Degree
1-8
Step 2
Air Temperature
Relative Humidity
Atmosphere
pressure
Installation Site
Altitude
Vibration
Temperature
Relative Humidity
Atmosphere
pressure
Vibration
2: good for a factory type environment.
Remove Fan
For Frame A and Frame B,
press and hold in the tabs on each side of the
fan and pull the fan up to release.
-10 ~ +40°C (14~104°F) for UL & cUL
-10 ~ +30 °C (14~86°F)for side-by-side mounting
<90%, no condensation allowed
86 ~ 106 kPa
<1000m
2
<20Hz: 9.80 m/s (1G) max
2
20 ~ 50Hz: 5.88 m/s
-20°C ~ +60°C (-4°F ~ 140°F)
<90%, no condensation allowed
86 ~ 106 kPa
2
<20Hz: 9.80 m/s (1G) max
2
20 ~ 50Hz: 5.88 m/s
(0.6G) max
(0.6G) max
Revision May 2009, 00DE, V0.50