Table of Contents
Advertisement
Display Message
Revision May 2009, 00DE, V0.50
Displays the master speed of the drive and RPM signal blinking.
Displays the actual output speed at terminals U/T1, V/T2, and W/T3.
User defined unit
Displays the output current at terminals U/T1, V/T2, and W/T3.
Displays the brushless DC motor drive forward run status.
Displays the brushless DC motor drive reverse run status.
The counter value (C).
Speed is controlled by current setting.
Speed is controlled by potentiometer and operation is controlled by the
digital keypad.
Displays the selected parameter.
Displays the actual stored value of the selected parameter.
External Fault.
Display "End" for approximately 1 second if input has been accepted and
automatically stored in memory.
Display "Err", if the input is invalid.
Chapter 3 Keypad and Start Up| BLD-E1 Series
Descriptions
3-3
Advertisement
Table of Contents
