Delta BLD-E1 Series User Manual page 100

03-00~0 2=9
Reg enerative
torque limit
03-00~0 2=10
Positive/negat ive torque limit
Reverse
03-00~0 2=10
Positive/negat ive torque limit
03-00~0 2=8
Neg ative to rque limit
Analog Input Bias 1 (VR)
03-03
Control
VF VFPG
mode
Settings
It is used to set the corresponding VR voltage of the external analog input 0.
Analog Input Bias 1 (ACI)
03-04
Control
VF VFPG
mode
Settings
It is used to set the corresponding ACI voltage of the external analog input 0.
Analog Input Bias 1 (AVI)
03-05
Control
VF VFPG
mode
Settings
It is used to set the corresponding AVI voltage of the external analog input 0.
The relation between external input voltage/current and setting frequency is equal to -
10~+10V (4-20mA) corresponds to 0~3000rpm.
Positive/negative Bias Mode (VR)
03-06
Control
VF VFPG
mode
Revision May 2009, 00DE, V0.50
Positive to rque
FOCPM
-100.0~100.0%
FOCPM
-100.0~100.0%
FOCPM
-100.0~100.0%
FOCPM
Chapter 4 Parameters| BLD-E1 Series
Neg ative T orq ue
03-00~0 2=7
Positive to rque limit
F orw ard
03-00~0 2=9
Reg enerative
torque limit
Factory setting: 0.0
Factory setting: 0.0
Factory setting: 0.0
Factory setting: 0
4-59