Lower Guide Assembly Removal (Pl9.2.26) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.12.7 LOWER GUIDE ASSEMBLY Removal (PL9.2.26)

1. Remove the EXIT TRAY ASSEMBLY. (See Section 3.2.13.1.)
2. Remove the OIL ROLL ASSEMBLY. (See Section 3.2.12.1.)
3. Remove the FUSER ASSEMBLY. (See Section 3.2.12.2.)
4. Remove the MAIN FUSER ASSEMBLY. (See Section 3.2.12.3.)
5. Open the UPPER GUIDE ASSEMBLY.
NOTE: When removing the LOWER GUIDE ASSEMBLY in the
following step, be careful not to damage the PRESSURE
ROLL with the P/R FINGERs.
NOTE: When removing the LOWER GUIDE ASSEMBLY in the
following step, make sure that the FUSER EXIT ACTUATOR
does not come off interfering with the FUSER EXIT
SENSOR.
6. Remove the screw (gold, tapped, 12mm) securing the LOWER
GUIDE ASSEMBLY. Then shift LOWER GUIDE ASSEMBLY
backward to remove.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-99. LOWER GUIDE ASSEMBLY Removal


When installing the LOWER GUIDE ASSEMBLY, leave
the P/R FINGERs open.


When servicing the MAIN FUSER ASSEMBLY, keep it
with its right side down.
OPEN
Revision A
3-82