Lower Housing Assembly Removal - Epson DLQ-3000 Service Manual

3.2.7 Lower Housing Assembly Removal

Step 1) Remove the rear cover. (See Section 3.2.2.1.)
Step 2) Remove the C210 MAIN board and C124 PSB/PSE board. (See Section 3.2.2.2
and Section 3.2.2.3.)
Step 3) Remove the upper housing assembly. (See Section 3.2.5.)
Step 4) Remove the printer mechanism. (See Section 3.2.6.1.)
Step 5) Remove 4 screws (CBB, 4X16) securing the lower housing assembly to the bottom
housing assembly, and release hooks on the bottom housing assembly fixing the
lower housing assembly.
Step 6) Remove the power switch from the lower housing assembly.
Step 7) Lift up the lower housing assembly and remove it.
Rev. A
Figure 3-38. Lower Housing Assembly Removal
Disassembly and Assembly
3-29