Epson ColorPage EPL-C8200 Service Manual page 340

Color laser printer
Hide thumbs Also See for ColorPage EPL-C8200:
Table of Contents

Advertisement

EPSON ColorPage EPL-C8200
Image Optimum
LED:
No effect on LED state.
Explanation:
There was not enough memory to process the print
data and the printer optimized the data (reduced the
resolution).
Solution:
This message remains even after the print job has
finished printing. Perform either of the following to
clear the warning.
1. Press the Continue button to clear the warning.
2. Perform a Reset operation or warm boot to exit
while the printer is processing data.
Check Paper Type
LED:
No effect on LED state.
Explanation:
There is no paper source that has the selected paper
size and type. Ignoring the paper type, the printer
selects the paper source that has the paper of the
selected size.
Solution:
Press the Continue button.
Outbin Select Error
LED:
No effect on LED state.
Explanation:
Paper is output from the outbin that was not
designated due to limiting condition.
Solution:
Press the Continue button.
Chapter 5
Troubleshooting
Need Memory
LED:
No effect on LED state.
Explanation:
While processing print data, the printer ran out of
memory. The printer attempted to compress the data,
however, the printer reached the threshold* and
generated this warning. If the data is still processing,
the printer continues to print. In some cases, the
printer can process the data and print even after this
warning message appears. If the user presses the
Continue button and the printer reaches the
threshold again while processing the same page of
data, the printer will show the same warning. In case
the printer prints by reducing the resolution after the
warning, the warning "Image Optimum" will be
indicated. (This message has higher priority.)
*: The printer-specific value that is not to be
changed.
Solution:
This message remains even after the print job has
finished printing. Perform one of the following to clear
the warning.
1. Press the Continue button.
2. To force out from the warning during data
processing, perform a reset operation or warm
boot.
NOTE: Installation of additional memory is recommended.
Revision A
5-12

Advertisement

Table of Contents
loading

Table of Contents