Sending/Receiving Commands/Status - Epson ColorPage EPL-C8200 Service Manual

Color laser printer

Hide thumbs Also See for ColorPage EPL-C8200:

Table of Contents

EPSON ColorPage EPL-C8200

4.2.4.3 Sending/receiving commands/status

NOTE: A command must be sent after the communication has been

established.

NOTE: For details, Section 4.2.7 "Commands/Status List" in this

Selecting From the Pull-down Menu

NOTE: Some command codes and parameter codes are not displayed

in the pull-down menu.

1. Click the [Manual] tab. The Manual screen appears.

2. Establish the communication. (See Section 4.2.4.2 "Setting up the

Communication".)

3. Click the [Class] box. Select the category that has the command you

want to send. (There are four categories, described in Section

4.2.2.3 "Command/Status categories".)

4. Select the command code that you want to send from the command

5. The selected command code is displayed in the [Command] box.

A single click only displays the command code in the

[Command] box.

A double-click displays the command code in the [Command]

box; if the selected command code has a parameter, the

appropriate parameter code is also displayed.

Table of Contents