EPSON ColorPage EPL-C8200
5.4 Print Quality Troubleshooting
This section describes how to solve the print quality problems by using
the Level 3 FIPs.
<Preliminary inspection>
In each FIP, you are required to perform the
"Preliminary inspection" prior to any other actions.
The Preliminary inspection involves the following:
Check for any part that does not meet the
specifications.
Check if any part has been installed improperly.
Check for part that is damaged, deformed, smeared,
or lodged with foreign matter.
Chapter 5
Troubleshooting
5.4.1 Print Quality Troubleshooting Entry Chart
Figure 5-2. Print Quality Troubleshooting Entry Chart
Revision A
5-110