Msi Assembly Removal (Pl4.1.1) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.7.2 MSI ASSEMBLY Removal (PL4.1.1)

1. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
2. Draw the MAIN P/H ASSEMBLY out.
3. Disconnect 2 connectors (P/J92B and 113B) connecting the MSI
ASSEMBLY and MSI P/H ASSEMBLY.
4. Remove the screws (gold, tapped, 8mm) securing the MSI EARTH
WIRE to the REGI. BRAKE BRACKET.
NOTE: In the next step, hold the MAIN P/H COVER ASSEMBLY
when you remove MAIN P/H COVER ASSEMBLY, or the P/
H COVER ASSEMBLY will be dislocated. (You can remove
the MAIN P/H COVER if necessary.)
5. Remove 2 screws (black, cup head, 12mm) securing the MSI
ASSEMBLY, and then remove the assembly by lifting it to the upper
right.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-28. MSI ASSEMBLY Removal
When installing the MSI ASSEMBLY, make sure that the
MSI CLUTCH gear in the MSI ASSEMBLY securely
meshes with the MAIN P/H ASSEMBLY PRE-REGI.
GEAR1.
Revision A
3-27