EPSON ColorPage EPL-C8200
3.2.16.6 COMMUNICATION ASSEMBLY Removal (PL13.2.2)
1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove the RIGHT COVER ASSEMBLY. (See Section 3.2.4.8.)
3. Draw out the MAIN P/H ASSEMBLY.
4. Remove the CONTROLLER PWB. (See Section 3.2.17.1.)
5. Remove the CONT. CHASSIS ASSEMBLY. (See Section 3.2.17.3.)
6. Disconnect the connector (P/J105) for the COMMUNICATION
ASSEMBLY and release the harness from the clump.
7. Remove the screw (silver, 6mm) securing the COMMUNICATION
ASSEMBLY and remove the COMMUNICATION ASSEMBLY.
When installing the COMMUNICATION ASSEMBLY,
align the location hole in the COMMUNICATION
ASSEMBLY with the protrusion on the frame of the
printer body.
Chapter 3
Disassembly and Assembly/Adjustment
Figure 3-139. COMMUNICATION ASSEMBLY Removal
Revision A
3-112