Drum Cartridge Replacement - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

6.3.3 DRUM CARTRIDGE Replacement

The photoconductor of the DRUM CARTRIDGE is exposed by the ROS
ASSEMBLY and developed by the DEVELOPER ASSEMBLY, and
transmits images onto the IBT.
A consumable DRUM CARTRIDGE ASSEMBLY contains the WASTE
TONER BOX.


When replacing the DRUM CARTRIDGE, be sure to
turn the printer power off.


Never touch the surface of the photoconductor (a
blue cylindrical part) with your hands. Also handle it
with a care since scratches and oil from your skin can
damage its surface and may affect print quality.


Avoid exposing the DRUM CARTRIDGE to direct
sunlight and strong light. Even in room light, do not
leave it for more than 5 minutes.


To avoid mar the photo conductor surface, work with
it on a flat table.


Never use toner in the WASTE TONER BOX again.


Be sure to put the used DRUM CARTRIDGE in a
plastic bag and disposed of it as inflammable, strictly
following the local regulation.
Chapter 6 Maintenance
1. Turn the printer power on.
2. Open the FRONT COVER.
Figure 6-15. DRUM CARTRIDGE Replacement 1
3. Turn the TENSION LEVER in the direction indicated with the arrow.
(See the left figure below.)
4. Turn the DRUM CARTRIDGE LEVER in the direction indicated with
the arrow. (See the right figure below.)
Figure 6-16. DRUM CARTRIDGE Replacement 2
Revision A
6-13