Tray N/P Sensor Assembly Removal (Pl3.1.30) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.6.7 TRAY N/P SENSOR ASSEMBLY Removal (PL3.1.30)

1. Remove the UNIVERSAL TRAY. (See Section 3.2.5.1.)
2. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
3. Remove the MAIN P/H ASSEMBLY with the MSI TRAY ASSEMBLY
installed on it. (See Section 3.2.8.1.)
4. Disconnect the following connectors;


P/J106 for LOW PAPER SENSOR and MAIN HARNESS
ASSEMBLY


P/J101 for TRAY N/P HARNESS and MAIN HARNESS
ASSEMBLY
5. Unhook the TRAY N/P SENSOR ASSEMBLY from the frame and
remove it.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-24. TRAY N/P SENSOR ASSEMBLY Removal
Route the harness carefully so that the harness don't
float.
Revision A
3-24