Epson ColorPage EPL-C8200 Service Manual page 497

EPSON ColorPage EPL-C8200
Table A-11. Plug and Jack (P/J) Location Table (2/7)
P/J Coordinate
Connects Process Motor Assembly and Main Harness
52 D-607
Assembly.
Connects Dispense Motor Assembly and Main Harness
55 E-708
Assembly.
Connects Developer Clutch Assembly and Main Harness
56 F-708
Assembly.
56A F-708 Connector in Main Harness Assembly.
57 C-509 Connects TR0 Sensor and Main Harness Assembly.
58 F-708 Connects Rotary Sensor and Main Harness Assembly.
Connects Cleaner Cam Solenoid and Fuser Harness
62 E-812
Assembly.
62A E-812 Connector in Fuser Harness Assembly.
63 C-710 Connects BTR Cam Solenoid and Main Harness Assembly.
63A C-710 Connector in Main Harness Assembly.
68 B-610 Connects Main Harness Assembly and Option.
68A B-610 Connector in Main Harness Assembly.
Connects Fuser Harness Assembly and Fuser Rear Rail
69A G-814
Relay Connector.
69B G-814 Connects Fuser Rear Rail Relay Connector and Option.
70 F-711 Connects Main Harness Assembly and Fuser Connector.
71 F-710 Connects Fuser Harness Assembly and Fuser Connector.
71A F-710 Connects Fuser Connector and Main Harness Assembly.
72A G-812 Connects Fuser Harness Assembly and Connector-5PW.
Connects Connector-5PW and Temperature Sensor
72B G-812
Assembly.
73 I-812 Connects Oil Cam Solenoid and Fuser Harness Assembly.
73A I-812 Connector in Fuser Harness Assembly.
Connects Exchange Solenoid and Fuser Harness
74 I-813
Assembly.
74A I-813 Connector in Fuser Harness Assembly.
Connects Fuser Exit Sensor and Temperature Sensor
75 H-808
Assembly.
76 F-813 Connects Fuser In Harness and Fuser Harness Assembly.
Chapter A Appendix
Notes
Table A-12. Plug and Jack (P/J) Location Table (3/7)
P/J Coordinate
76A F-813 Connector in Fuser Harness Assembly.
Connects CRU Switch Assembly and Fuser Harness
77 G-808
Assembly.
77A G-808 Connector in Fuser Harness Assembly.
78A I-813 Connector in Fuser Harness Assembly.
78B I-813 Connector in Fuser Harness Assembly.
79 E-812 Connects Heater Wire and Fuser Harness Assembly.
80 D-813 Connects Fuser Chute Fan and Fuser Harness Assembly.
80A D-813 Connector in Fuser Harness Assembly.
Connects ADC Sensor Assembly and Main Harness
81 C-110
Assembly.
81A C-110 Connector in Main Harness Assembly.
82 G-608 Connects Developer Fan and Main Harness Assembly.
82A G-608 Connector in Main Harness Assembly.
83 G-106 Connects Toner Box Sensor and Toner Box Harness.
83A G-106 Connector in Toner Box Harness.
Connects Main Harness Assembly and CRUM Connector
84 I-107
Assembly.
84A I-107 Connector in Main Harness Assembly.
Connects CRUM Connector Assembly and CRUM
85 H-107
Assembly.
Connects Erase Lamp Assembly and Main Harness
86 I-105
Assembly.
86A I-105 Connector in Main Harness Assembly.
Connects Used Cartridge Sensor and Main Harness
87 I-506
Assembly.
88 F-106 Connects Waste Toner Sensor and Toner Box Harness.
89 D-805 Connects Cartridge Sensor Harness and Exit Harness.
89A D-805 Connector in Exit Harness.
90A G-409 Connector in Registration Harness Assembly.
90B G-409 Connector in Registration Harness Assembly.
Revision A
Notes
A-25