Fip-1.19 Drum Cartridge Is Out - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

FIP-1.19 DRUM CARTRIDGE is Out

Step Check point
Perform the preliminary inspection.
Parts to inspect:
1
TONER BOX SENSOR, TONER BOX HARNESS, MAIN
HARNESS ASSY, MCU PWB
Check: WASTE TONER BOX installation

2
Is the WASTE TONER BOX properly installed?
Check: DRUM CARTRIDGE installation

3
Is the DRUM CARTRIDGE properly installed?
Check: CRUM CONNECTOR ASSY electrical
continuity

4
Does the CRUM CONNECTOR ASSY have proper
continuity at the pins below?
- J23<=>P22
Check: DRUM CARTRIDGE replacement
5
Replace the DRUM CARTRIDGE.

Does the problem still occur?
Check: TONER BOX SENSOR installation

6
Is the TONER BOX SENSOR properly installed?
Check: TONER BOX SENSOR

Is the TONER BOX SENSOR properly functioning?
7
(Check it by using the diagnostic tool.)
Diag Tool: Digital Input Test
Device Code: 0D
Chapter 5 Troubleshooting
Yes
Replace/reinstall the defective part(s).
Go to Step 3.
Go to Step 4.
Go to Step 5.
Go to Step 6.
• With the diagnostic tool, go to step 7.
• Without the diagnostic tool, go to
FIP-2.18 "TONER BOX SENSOR is
Defective".
Replace the MCU PWB.
Remedy
No
Go to Step 2.
Install the WASTE TONER BOX
properly.
Install the DRAM CARTRIDGE
properly.
Replace the CRUM CONNECTOR
ASSY.
Problem solved.
Install the TONER BOX SENSOR
properly.
Go to FIP-2.18 "TONER BOX SENSOR
is Defective".
Revision A
5-36