P/H Turn Chute Assembly Removal (Pl5.1.4) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.8.3 P/H TURN CHUTE ASSEMBLY Removal (PL5.1.4)

1. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
2. Remove the MSI ASSEMBLY. (See Section 3.2.7.2.)
3. Remove the MAIN P/H ASSEMBLY. (See Section 3.2.8.1.)
4. Remove the PRE-REGI. CHUTE ASSEMBLY. (See Section
3.2.8.2.)
NOTE: In the following steps, be careful not to damage the housing
which will be widen forcibly.
5. Pulling the socket areas in the P/H FRAME ASSEMBLY where the
pegs in the P/H TURN CHUTE ASSEMBLY fit in, turn the P/H
TURN CHUTE ASSEMBLY in the direction indicated with the arrow
(5)-1 (See the figure below.) to release the lower pegs from the P/H
FRAME ASSEMBLY.
Figure 3-43. P/H TURN CHUTE ASSEMBLY Removal (1/2)
Chapter 3 Disassembly and Assembly/Adjustment
6. Push the upper pegs in the P/H TURN CHUTE ASSEMBLY inward
and remove the P/H TURN CHUTE ASSEMBLY from the P/H
FRAME ASSEMBLY
Figure 3-44. P/H TURN CHUTE ASSEMBLY Removal (2/2)
Revision A
3-40