EPSON ColorPage EPL-C8200
3.1 Overview
This chapter describes procedures for disassembly, assembly, and
adjustment of the EPL-C8200. Note the procedures are applicable only
when the printer has no options installed. For information on removing/
installing the options, please see the EPL-C8200 Setup Guide.
3.1.1 Precautions for disassembly, assembly and
adjustment
Precautions for disassembly, assembly and adjustment are as follows:
Before starting, be sure to turn the printer off and
unplug the power cable from the AC power socket.
As this printer weighs as much as 70Kg, make sure
that it is always carried carefully by 4 people or more.
When working on the FUSER ASSEMBLY or nearby
parts, be sure to wait until the temperature of the parts
cool down to a safe level.
When printing, make sure that all the outer covers are
installed.
In case you need to print before assembling, note the
cautions below:
1. Be careful not to get your hands and clothes
caught in the rotating parts such as rollers and
cooling fans.
2. Never touch any electrical terminal or high voltage
components such as HVPS and LVPS.
Chapter 3
Disassembly and Assembly/Adjustment
When servicing, avoid handling any parts forcibly.
Doing so might damage the parts and cause printer
malfunction.
Various types of screws are used to assemble the
printer, and wrong usage might crush tapped hole
and cause troubles. Therefore, be sure to mount the
right screws to the specified positions.
Revision A
3-1
Need help?
Do you have a question about the ColorPage EPL-C8200 and is the answer not in the manual?