Level 1 Fip (Fault Isolation Procedure) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

5.2 Level 1 FIP (Fault Isolation Procedure)

This section describes how to isolate the faulty unit (assembly) by using
the Level 1 FIPs.
<Preliminary inspection>
In each FIP, you are required to perform the
"Preliminary inspection" prior to any other actions.
The Preliminary inspection involves the following:


Check for any part that does not meet the
specifications.


Check if any part has been installed improperly.


Check for part that is damaged, deformed, smeared,
or lodged with foreign matter.
Chapter 5 Troubleshooting
Revision A
5-17