Fusing; Oil Roll Assembly Removal (Pl9.1.10); Fuser Assembly Removal (Pl9.1.1) - Epson ColorPage EPL-C8200 Service Manual

Color laser printer

Hide thumbs Also See for ColorPage EPL-C8200:

Table of Contents

EPSON ColorPage EPL-C8200

3.2.12 Fusing

1. Draw out the FUSER ASSEMBLY.

Be careful when handling the OIL ROLL ASSEMBLY.

If it is still very hot, you may get burnt. Therefore,

always check that the OIL ROLL ASSEMBLY has

cooled down enough for servicing.

NOTE: In the following step, place the removed OIL CAM

ASSEMBLY in a stable, level condition with its roller side

facing upward.

2. Remove the OIL ROLL ASSEMBLY by holding its handles.

Figure 3-93. OIL ROLL ASSEMBLY Removal

Disassembly and Assembly/Adjustment

1. Remove the EXIT TRAY ASSEMBLY. (See Section 3.2.13.1.)

2. Draw out the UNIVERSAL TRAY.

3. Draw out the FUSER ASSEMBLY.

4. Remove the OIL ROLL ASSEMBLY. (See Section 3.2.12.1.)

NOTE: FUSER ASSEMBLY weighs quite heavily. Therefore, in the

following step, be careful not drop it or get it touch with other

5. Loosen the screw (black, cup head, 8mm) at the front left of the

printer, and lift up the FUSER ASSEMBLY to the upper left and

remove the FUSER ASSEMBLY.

Figure 3-94. FUSER ASSEMBLY Removal

Table of Contents