Xl Rail Assembly Removal (Pl6.1.40) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.9.5 XL RAIL ASSEMBLY Removal (PL6.1.40)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
3. Remove the ROS ASSEMBLY. (See Section 3.2.9.3.)
4. Remove the connectors P/J86 and P/J116 for the ERASE LAMP
ASSEMBLY and the TONER BOX HARNESS, respectively.
5. Release the harnesses for the ERASE LAMP, ROS HARNESS, and
VIDEO HARNESS from the clamps.
NOTE: In the following step, be sure not to damage the IBT BELT
ASSEMBLY and the Magnet Rolls in the Developer
Assembly with such parts as XL RAIL ASSEMBLY and the
harnesses.
NOTE: In the following step, be sure to keep your hands off the IBT
BELT ASSEMBLY and the Magnet Roll surface.
6. Remove 4 screws (sliver, cup head, 8mm) securing the XL RAIL
ASSEMBLY, and then remove the XL RAIL ASSEMBLY.


When installing the XL RAIL ASSEMBLY, be sure not
to damage the IBT BELT ASSEMBLY and the Magnet
Rolls in the Developer Assembly with such parts as
XL RAIL ASSEMBLY and the harnesses.


When installing the XL RAIL ASSEMBLY, be sure to
keep your hands off the IBT BELT ASSEMBLY and the
Magnet Roll surface.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-62. XL RAIL ASSEMBLY Removal
Revision A
3-54