Waste Toner Sensor Removal (Pl6.1.42); Toner Box Sensor Removal (Pl6.1.43) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.9.6 WASTE TONER SENSOR Removal (PL6.1.42)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
3. Remove the ROS ASSEMBLY. (See Section 3.2.9.3.)
4. Remove the XL RAIL ASSEMBLY. (See Section 3.2.9.5.)
5. Release the harness from the hook on the XL RAIL ASSEMBLY and
the clamp.
6. Disconnect the connector (P/J88) for the WASTE TONER
SENSOR.
7. Release the hooks securing the WASTE TONER SENSOR from the
XL RAIL ASSEMBLY, and remove the WASTE TONER SENSOR.
Figure 3-63. WASTE TONER SENSOR Removal
When installing the WASTE TONER SENSOR, make
sure the harness is not loosely routed.
Chapter 3 Disassembly and Assembly/Adjustment

3.2.9.7 TONER BOX SENSOR Removal (PL6.1.43)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
3. Remove the ROS ASSEMBLY. (See Section 3.2.9.3.)
4. Remove the XL RAIL ASSEMBLY. (See Section 3.2.9.5.)
5. Release the harness for the TONER BOX SENSOR from the clamp.
6. Disconnect the connector (P/J83A) for the TONER BOX SENSOR.
7. Unhook the TONER BOX SENSOR from the XL RAIL ASSEMBLY,
and remove the TONER BOX SENSOR.
Figure 3-64. TONER BOX SENSOR Removal
When installing the TONER BOX SENSOR, make sure
the harness is not loosely routed.
Revision A
8)-2
8)-1
3-55