P/H Motor Assembly Removal (Pl11.1.3); Rotary Motor Pwb Removal (Pl11.1.21) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.14.2 P/H MOTOR ASSEMBLY Removal (PL11.1.3)

1. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
2. Disconnect 2 connectors (P/J49 and P/J50) from the P/H MOTOR
ASSEMBLY.
3. Remove 5 screws (black, cup head, 4mm) securing the P/H
MOTOR ASSEMBLY and remove the P/H MOTOR ASSEMBLY
along with 2 P/H MOTOR SUPPORTs.
4. Using pliers, remove the 2 P/H MOTOR SUPPORTs from the P/H
MOTOR ASSEMBLY.
Figure 3-124. P/H MOTOR ASSEMBLY Removal
Chapter 3 Disassembly and Assembly/Adjustment

3.2.14.3 ROTARY MOTOR PWB Removal (PL11.1.21)

1. Remove the REAR COVER ASSEMBLY.(See Section 3.2.4.5.)
NOTE: In the following step, the ROTARY MOTOR PWB will be
kept connected to the printer body with the harness.
Therefore, be careful not to leave the ROTARY MOTOR
PWB too far from the printer.
2. Remove the screw (silver, cup head, 8mm) securing the ROTARY
MOTOR PWB and separate the ROTARY MOTOR PWB from the
printer body.
3. Disconnect 3 connectors (P/J245, P/J246, P/J247) for the ROTARY
MOTOR PWB and remove the ROTARY MOTOR PWB.
Figure 3-125. ROTARY MOTOR PWB Removal
Revision A
3-100