Wiring Diagram - §4 - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200
A.3.3.4 Wiring Diagram - §4
Table A-23. Signal Description - §4
Signal Name
USED CARTRIDGE Signal to detect new/old Toner cartridge (Low: New/
SENSED (H) 5VDC High: Old).
SENSOR ON (H) 5VDC Sensor power ON/OFF signal for the Used Cartridge
Sensor and Cartridge Sensor (High: ON/Low: OFF).
CARTRIDGE SENSED (L) Toner Cartridge detection signal (Low: Toner
5VDC Cartridge/High: No Toner Cartridge).
ROTARY HOME SENSED Signal from the Rotary Sensor to detect the Rotary
(H) 5VDC Frame Assembly protrusion.
DEVELOPER CLUTCH ON Control signal to turn the Developer Clutch ON/OFF.
(L) 24VDC
DEVELOPER FAN HALF- Signal to detect the rotation of the Developer Fan
SPEED (H) 24VDC (Low: Fast/High: Slow).
DEVELOPER FAN ON (H) Control signal to turn the Developer Fan ON/OFF.
24VDC
DISPENSE MOTOR ON( L) Control signal to turn the Dispense Motor Assembly
24VDC ON/OFF.


Developer Clutch coil resistance: 150

Developer Fan

Number of polarities: 4

Number of rotations: 3400 ±200rpm (Fast) / 2500 ±250rpm
(Slow)


Dispense Motor Assembly

Motor type: DC synchronous motor

Number of polarities: 8

Number of rotations (motor controlled): 113.9 ±11.4rpm

Rotation direction: Counterclockwise (viewed from the rear)
Chapter A Appendix
Description
10% (20 C)
Revision A
A-39