Front Paper Guide Assembly Removal - Epson Stylus COLOR 800 Service Manual

EPSON Stylus &2/25 800

3.7 Front Paper Guide Assembly Removal

1. Remove the paper eject frame assembly. (See Section 3.6.)
2. Lift up the front paper guide assembly slightly, and shift it forward while sliding it to the left
to release the pins from the cutouts in the right frame. (See Figure 3-14.)
There are 4 pins, 2 on each edge. Be sure to fit them into the cutouts in the right and left
frame when installing the front paper guide assembly.
When engaging the gear (19 mm) on the left edge of the front paper guide assembly
and the gear (17 mm) on the left edge of the paper feed roller, be careful not to damage
them.
3-14
Figure 3-14. Front Paper Guide Removal
Rev. A