Cru Switch Assembly Removal (Pl9.3.25) - Epson ColorPage EPL-C8200 Service Manual

EPSON ColorPage EPL-C8200

3.2.12.20 CRU SWITCH ASSEMBLY Removal (PL9.3.25)

1. Remove the EXIT TRAY ASSEMBLY. (See Section 3.2.13.1.)
2. Remove the OIL ROLL ASSEMBLY. (See Section 3.2.12.1.)
3. Remove the FUSER ASSEMBLY. (See Section 3.2.12.2.)
4. Remove the MAIN FUSER ASSEMBLY. (See Section 3.2.12.3.)
5. Remove the EXCHANGE CHUTE. (See Section 3.2.12.13.)
6. Remove the EXCHANGE SOLENOID. (See Section 3.2.12.15.)
7. Remove the FUSER TRAY LEVER. (See Section 3.2.12.16.)
8. Disconnect the connector (P/J77) for the CRU SWITCH
ASSEMBLY and release the harness from the clamp.
NOTE: Be careful not to damage the contact parts of the CRU
SWITCH ASSEMBLY.
9. Release the hooks securing the CRU SWITCH ASSEMBLY from
the FUSER TRAY and remove the CRU SWITCH ASSEMBLY.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-113. CRU SWITCH ASSEMBLY Removal
Revision A
3-94