HP LaserJet Utility for Mac OS
This section describes printer installation software for Mac OS-
compatible computer systems. It also explains how to use the
HP LaserJet Utility to configure HP printers connected to an
AppleTalk network through an HP Jetdirect print server. This
section also explains how to use the Chooser to select and set
up a Mac OS computer to print to your HP printer.
Installing the Printer Software
If the HP LaserJet Utility was included on your printer's CD-
ROM, see your printer documentation for installation
instructions, then skip to the next section to configure the
printer.
If you are installing the HP LaserJet Utility from the HP
Jetdirect CD-ROM, use the following installation instructions.
Note If you are installing the HP LaserJet Utility from a
source other than the CD-ROM, see the README file
that accompanies the software for installation
instructions.
Note Automatic virus detection programs might interfere
with the installation of this software. Turn off any
such programs that are active on your Mac OS
computer before proceeding with the installation
process.
1
Insert the CD-ROM into the CD-ROM drive.
2
In the HP Installer window, double-click the installation
icon for the software in the language you want.
3
Follow the instructions on the screen.
For more information about configuring your printer driver,
see the online documentation provided on the CD-ROM that
came with the printer.
Configuring the Printer
The HP LaserJet Utility allows printer settings such as printer
name and preferred zone to be configured from your Mac OS
system. Hewlett-Packard recommends that only network
administrators use the printer configuration capabilities of this
utility.