HP Jetdirect 250M User Manual page 266

42 The IP address specified for the print server (through BOOTP) is an invalid IP address for
INVALID IP specifying a single node. Check your Bootptab file for proper entries.
ADDRESS
43 The IP subnet mask specified for the print server (through BOOTP) is an invalid subnet
INVALID SUBNET mask. Check your Bootptab file for proper entries.
MASK
44 The default gateway IP address specified for the print server (through BOOTP) is an
INVALID invalid IP address for specifying a single node. Check your Bootptab file for proper entries.
GATEWAY
ADDRESS
45 The syslog server IP address specified for the print server (through BOOTP) is an invalid
INVALID SYSLOG IP address for specifying a single node. Check your Bootptab file for proper entries.
ADDRESS
46 The TFTP server IP address specified for the print server (through BOOTP) is an invalid IP
INVALID SERVER address for specifying a single node. Check your Bootptab file for proper entries.
ADDRESS
47 One of the SNMP trap (Trap PDU) destination IP addresses specified for the print server
INVALID TRAP (through TFTP) is an invalid IP address for specifying a single node. Check your TFTP
DEST ADDRESS configuration file.
48 The TFTP configuration file contained an incomplete last line that did not end in a new
CF ERR - FILE line character.
INCOMPLETE
49 A line being processed in the TFTP configuration file was longer than the print server
CF ERR - LINE could accept.
TOO LONG
4A A TFTP configuration file line contained an unknown keyword.
CF ERR -
UNKNOWN
KEYWORD
4B A line in the TFTP configuration file was missing a required parameter.
CF ERR - MISSING
PARAMETER
4C A line in the TFTP configuration file contained an invalid value for one of the parameters
CF ERR - INVALID on that line.
PARAMETER
4D The TFTP configuration file specified too many access list entries using the "allow:"
CF ERR - ACCESS keyword.
LIST EXCEEDED