HP Jetdirect 250M User Manual page 134

8 Set the IP address lease duration for your DHCP clients.
Then click Next.
HP recommends that all printers be assigned reserved IP
addresses. This can be accomplished after you set up the
scope (see step 11).
9 Select No to configure DHCP options for this scope later.
Then click Next.
To configure DHCP options now, select Yes and click
Next.
a. If desired, specify the IP address of the router (or
default gateway) to be used by clients. Then click
Next.
b. If desired, specify the Domain Name and DNS
(Domain Name System) servers for clients. Click
Next.
c. If desired, specify WINS server names and IP
addresses. Click Next.
d. Select Yes to activate the DHCP options now, and
click Next.
10 You have successfully set up the DHCP scope on this
server. Click Finish to close the wizard.
11 Configure your printer with a reserved IP address within
the DHCP scope:
a. In the DHCP tree, open the folder for your scope and
select Reservations.
b. Click the Action menu and select New
Reservation.
c. Enter the appropriate information in each field,
including the reserved IP address for your printer.
(Note: the MAC address for your HP Jetdirect-
connected printer is available on the HP Jetdirect
configuration page.)
d. Under "Supported types", select DHCP only, then
click Add. (Note: Selecting Both or BOOTP only
will result in a configuration via BOOTP due to the
sequence in which HP Jetdirect print servers initiate
configuration protocol requests.)
e. Specify another reserved client, or click Close. The
reserved clients added will be displayed in the
Reservations folder for this scope.
12 Close the DHCP manager utility.
NetWare Systems