HP Jetdirect 250M User Manual page 168

a. Click Start, Setup, and Control Panel. Double-
click the Network and Dial-up Connections
folder.
b. Click the Advanced menu and select Optional
Networking Components.
c. Select and enable Other Network File and Print
Services.
d. Click Details, and verify that Print Services for
Unix is enabled. If not, enable it.
e. Click Okay, and then Next.
2 Open the Printers folder (from the Desktop, click Start,
Settings, and Printers).
3 Double-click Add Printer. From the Add Printer Wizard
welcome screen, click Next.
4 Select Local printer, and disable automatic detection
for Plug and Play printer installation. Click Next.
5 Choose Create a new port, and select LPR Port. Click
Next.
6 In the Add LPR compatible printer window:
• Enter the DNS name or IP address of the HP
Jetdirect print server.
• Enter (in lower case) raw, text, or auto for the name
of the printer or print queue on the HP Jetdirect print
server.
Then click OK.
Note The HP Jetdirect print server treats text files as
unformatted text or ASCII files. Files that are raw are
formatted files in PCL, PostScript, or HP-GL/2 printer
languages.
For HP Jetdirect external print servers with three
ports, use raw1, raw2, raw3, text1, text2, text3 or
auto1, auto2, auto3 to specify the port.
7 Select the Manufacturer and Printer model. (If necessary,
click Have Disk and follow the instructions to install the
printer driver.) Click Next.
8 Choose to keep the existing driver, if prompted. Click
Next.
9 Enter a printer name, and choose whether this printer
will be the default printer. Click Next.
10 Choose whether this printer will be available to other
computers. If shared, enter a share name that identifies
the printer to other users. Click Next.