HP Jetdirect 250M User Manual page 146

The IP address of the primary Windows Internet Name Service
pri-wins-svr
(WINS) server, in dotted notation.
sec-wins- The IP address of the secondary Windows Internet Name Service
svr (WINS) server, in dotted notation.
(SMTP Mail Server) The IP address of the outgoing e-mail Simple
smtp-svr Mail Transport Protocol (SMTP) server, for use with supported Scan
devices.
TCP/IP Print Options
9100- Enables or disables printing to TCP port 9100 on the print server. 0
printing disables, 1 (default) enables.
Enables or disables the ability to print via FTP. 0 disables, 1 (default)
ftp-printing
enables. (TCP ports 20, 21)
Enables or disables the ability to print using IPP. 0 disables, 1
ipp-printing
(default) enables. (TCP port 631)
Enables or disables the ability to print using LPD. 0 disables, 1
lpd-printing
(default) enables.(TCP port 515)
Enables or disables printing an LPD banner page. 0 disables banner
banner
pages. 1 (default) enables banner pages.
Specifies whether an acknowledgement (ACK) on all TCP packets is
required before the printer is allowed to close a Port 9100 print
connection. To accommodate multiport print servers, a Port Number
interlock
and Option value are specified. Port Numbers can be 1 (default), 2,
or 3. Option value 0 (default) disables interlock, 1 enables. For
example, "interlock 2 1" specifies Port 2, interlock enabled.
Enables or disables buffer packing for TCP/IP packets.
buffer- 0 (default) is normal, the data buffer is packed before sending to the
packing printer.
1 disables buffer packing, data is sent to the printer as it is received.
Controls the setting of the TCP PSH flag for device-to-client data
transfers.
0 (default): disables this option, flag is not set.
write-mode
1: all-push option. The push bit is set in all data packets.
2: eoi-push option. The push bit is set only for data packets that have
an End-of-Information flag set.
(Restrict Mult Prt) Enables or disables multiple TCP connections.
mult-tcp-
0 (default): allows multiple connections.
conn
1: disables multiple connections.
TCP/IP Raw Print Ports
Specifies additional ports for printing to TCP port 9100. Valid ports
raw-port
are 3000 to 9000, which are application dependent.
TCP/IP Access Control