HP Jetdirect 250M User Manual page 61

Configure and Manage
the HP Jetdirect 200m and 250m print servers
This section describes the tools you can use to configure and manage your
print server, as well as the settings you can apply for various protocols.
Use this page to link to topics of interest.
Default configuration
comes from the factory, and tells how to reset it to that configuration.
Software solutions matrix
you can use to install, configure, and manage a network printer. (These
are the same tools described in the Install section.) These tools cover a
variety of functions in a variety of operating environments. In general,
they allow you to set parameters for the various protocols listed below.
Embedded Web server
the print server. The embedded Web server provides another way to
configure and manage the print server.
Protocols -- provides information on configuring the various protocols
supported by the HP Jetdirect 200m and 250m print servers.
TCP/IP -- includes an overview of TCP/IP, as well as information
on these methods of applying TCP/IP parameters to the print
server:
BOOTP/TFTP
DHCP
RARP
arp and ping
Telnet
embedded Web server
LPD (line printer daemon) printing
FTP printing
DLC/LLC -- can be enabled or disabled; otherwise there are no
parameters to set on the Jetdirect module.
IPX/SPX -- in most cases, parameters do not need to be set on
the Jetdirect module.
AppleTalk -- Printer Name and Printer Zone parameters can be
set through the
Security features
of configuring and managing the print server.
-- describes the print server's configuration as it
-- describes a variety of software tools that
-- describes the Web server contained within
HP LaserJet Utility for
-- describes the security offered by the various ways
MacOS.