HP Jetdirect 250M User Manual page 263

(Ethernet) The HP Jetdirect print server was unable to find the NetWare print server
(Remote Printer mode) or file server (Queue Server mode). (There was no response to
service queries for advertising print servers or file servers that matched the configured
17 UNABLE TO print server or file server name.)
FIND SERVER Make sure that the print server or file server is running and that the print server or file
server name configured on the HP Jetdirect print server matches the actual name used by
the print server or file server. Also make sure that all cables and routers are functioning
correctly.
The HP Jetdirect print server detected that the password for the NetWare print server
object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the password for the
18 PASSWORD print server object. When the HP Jetdirect print server logs on again, it sets a new
ERROR password.
Note: When multiple file servers are configured, the error is only displayed on the
configuration page if none of the file servers are connected.
The HP Jetdirect print server detected that the print server object has not been assigned
any queues to service. Assign queues to the print server object using printer installation or
19 NO QUEUE
NetWare utilities.
ASSIGNED
Note: When multiple file servers are configured, the error is only displayed on the
configuration page if none of the file servers were successfully connected.
1A PRINTER A NetWare printer number for this printer has not been configured. Assign a valid printer
NUMBER NOT number to the HP Jetdirect print server. Use a NetWare utility (such as PCONSOLE), the
DEFINED Jetdirect embedded web server, or other tool to assign a printer number.
The NetWare printer number assigned to the printer is already in use by another printer.
1B PRINTER Assign an unused printer number. This may also occur when a printer is power cycled, in
NUMBER IN USE which case the error goes away after the print server times out and detects the lost
connection.
The file server does not have a print server object that corresponds to the specified
NetWare node name. Use printer installation software, a NetWare utility (such as
1C PRINT SERVER
PCONSOLE), or other tool to create the print server object.
NOT DEFINED
When the HP Jetdirect print server is configured for multiple file servers, the error is only
displayed on the configuration page if none of the file servers made the connection.
1D UNABLE TO Remote Printer mode error: The HP Jetdirect print server was unable to establish an SPX
CONNECT TO connection with the NetWare print server. Make sure that the NetWare print server is
SERVER running and that all cables and routers are functioning correctly.
The SPX connection to the print server was lost when the HP Jetdirect print server
1E FAIL
attempted to reserve the printer number. This indicates a possible network problem, or a
RESERVING
problem with the print server. Make sure all cables and routers are functioning correctly.
PRINTER NUM
Try restarting the print server.
A failure was detected when selecting the buffer size to be used when reading print data
1F ERR
from the file server. This may indicate a network problem.
NEGOTIATING
When the HP Jetdirect print server is configured for multiple file servers, the error is only
BUFFER SIZE
displayed on the configuration page if none of the file servers was successfully connected.
A failure was detected when the HP Jetdirect print server tried to log onto the file server.
This could be caused by the print server object not existing on the file server, or by a
security check that prevents the print server from logging in.
20 UNABLE TO
Make sure the file server name and print server object name are correct. Use PCONSOLE
LOGIN
to erase the password for the print server object. Create a new print server object.
When the HP Jetdirect print server is configured for multiple file servers, the error is only
displayed on the configuration page if none of the file servers made the connection.
A failure was detected when the HP Jetdirect print server tried to set the password for the
print server object. (Whenever the HP Jetdirect print server is able to log in without a
21 UNABLE TO SET password, it sets the password automatically.) This indicates a networking or security
PASSWORD problem. Create a new print server object.
When multiple file servers are configured, the error is only displayed on the configuration
page if none of the file servers were successfully connected.