#
# Example of an HP Jetdirect TFTP
Configuration File
#
# Allow only Subnet 192.168.10 access to
peripheral.
# Up to 10 'allow' entries can be written
via TFTP.
# Up to 10 'allow' entries can be written
via Telnet
# or embedded web server.
# 'allow' may include single IP addresses.
#
allow: 192.168.10.0 255.255.255.0
#
#
# Disable Telnet
#
telnet: 0
#
# Enable the embedded web server
#
ews-config: 1
#
# Detect SNMP unauthorized usage
#
authentication-trap: on
#
# Send Traps to 192.168.10.1
#
trap-dest: 192.168.10.1
#
# Specify the Set Community Name
#
set-community-name: 1homer2
#
# End of file
List of Supported TFTP Parameters
parameters (HP Jetdirect firmware version x.21.01 or greater).
TFTP Configuration File Parameters
parameters.
Table 3.2 List of Supported TFTP Parameters
General
•
passwd:
•
sys-location:
•
sys-contact:
TCP/IP Main
•
host-name:
•
domain-name:
•
dns-svr:
lists the supported TFTP
describes the TFTP
•
pri-wins-svr:
•
sec-wins-svr:
•
smtp-svr: