Tftp Configuration File Entries - HP Jetdirect 250M User Manual

T148 --
T149 --
T150 --
T151 --
A colon (:) indicates the end of a field, and a backslash (\)
indicates that the entry is continued on the next line. Spaces
are not allowed between the characters on a line. Names, such
as host names, must begin with a letter and can contain only
letters, numbers, periods (for domain names only), or
hyphens. The underline character (_) is not allowed. Refer to
your system documentation or online help for more
information.

TFTP Configuration File Entries

To provide additional configuration parameters for your HP
Jetdirect print server, such as SNMP (Simple Network
Management Protocol) or non-default settings, an additional
configuration file can be downloaded using TFTP. This TFTP
configuration file's relative path name is specified in the
BOOTP reply using the /etc/bootptab file's T144 vendor-
specific tag (or the "ef" standard BOOTP tag) entry. An
example of a TFTP configuration file is provided below (the
symbol '#' denotes a remark and is not included in the file).
IP Gateway Disable option. An
HP-proprietary tag to prevent
configuration of a gateway IP
address. 0 (default) allows an IP
address. 1 prevents a Gateway
IP address to be configured.
Interlock Mode option. An HP-
proprietary tag that specifies
whether an acknowledgement
(ACK) on all TCP packets is
required before the printer is
allowed to close a Port 9100
print connection. To
accommodate multiport print
servers, a Port Number and
Option value are specified. Port
Numbers can be 1 (default), 2,
or 3. Option value 0 (default)
disables interlock, 1 enables.
Example: 2 1 specifies Port 2,
interlock enabled
TFTP server's IP address
option. An HP-proprietary tag
to specify the TFTP server's IP
address where the TFTP
configuration file is located.
Network Configuration option.
An HP-proprietary tag to
specify either "BOOTP-ONLY"
or "DHCP-ONLY" requests be
sent.