HP Jetdirect 250M User Manual page 145

Alpha-numeric string (up to 32 characters), to assign or change the
host-name name of the network device. For example, "host-name printer1"
assigns the name "printer1" to the device.
Specify the configuration method:
manual: The print server will wait for IP parameters using manual
tools (such as Telnet, embedded web server, control panel,
installation/management software). Status will be "User Specified".
ip-config
bootp: The print server will send BOOTP requests on the network
for dynamic IP configuration.
dhcp: The print server will send DHCP requests on the network for
dynamic IP configuration.
IP address for the print server, in dotted notation. For example:
"ip-config manual"
"ip 192.168.45.39"
where "ip-config" specifies manual configuration and "ip" manually
ip
sets the IP address 192.168.45.39 on the print server.
Specifying 0.0.0.0 clears the IP address.
If you exit and save a new IP address, it must be specified on the next
Telnet connection.
A value (in dotted notation) that identifies the network and host
portions of an IP address in received messages. For example,
"subnet-mask 255.255.255.0"
subnet-
stores the subnet mask value 255.255.255.0 on the print server. The
mask
value 0.0.0.0 disables the subnet mask. For more information see
TCP/IP
The IP address of a default gateway, in dotted notation. For example,
"default-gw 192.168.40.1"
assigns 192.168.40.1 as the IP address of the default gateway for the
print server.
default-gw Note: If the HP Jetdirect print server is configured by DHCP and
you manually change the subnet mask or the default gateway
address, you should manually change the print server's IP address.
This will release the DHCP-assigned address back to the DHCP IP
address pool.
(Read-only parameter) The IP address of the server (such as a
Config
BOOTP or DHCP server) that last configured the IP address on the
Server
HP Jetdirect print server.
TFTP (Read-only parameter) The IP address of the TFTP server that
Server provided TFTP parameters to the HP Jetdirect print server.
(Read-only parameter) The path and TFTP filename on the TFTP
TFTP
server. For example,
Filename
hpnp/printer1.cfg
The domain name for the device. For example, "domain-name
support.hp.com"
domain-
assigns "support.hp.com" as the domain name.
name
The domain name does not include the host name--it is not the Fully
Qualified Domain Name (such as printer1.support.hp.com).
dns-svr IP address of the DNS (Domain Name System) server.
Overview.