HP Jetdirect 250M User Manual page 118

tr 58
tv 59
T69 69
T144 --
T145 --
T146 --
T147 --
DHCP T1 timeout, specifying
the DHCP lease renewal time
(seconds).
DHCP T2 timeout, specifying
the DHCP lease rebind time
(seconds).
The IP address (in hexadecimal)
of the preferred outgoing e-mail
SMTP (Simple Mail Transport
Protocol) server, for use with
supported Scan devices.
An HP-proprietary tag that
specifies the relative path name
of the TFTP configuration file.
Long path names may be
truncated. The path name must
be in double quotes (for
example, "pathname"). For file
format information, refer to
"TFTP Configuration File
Entries".
Note: Standard BOOTP option
18 (extensions file path) also
allows a standard tag (ef) to
specify the relative path name of
the TFTP configuration file.
Idle Timeout option. An HP-
proprietary tag to set the idle
timeout (seconds), which is the
amount of time that a print data
connection may remain idle
before being closed. The range
is 1 - 3600 seconds.
Buffer Packing option. An HP-
proprietary tag to set buffer
packing for TCP/IP packets.
0 (default): Normal, data
buffers are packed before
sending to the printer.
1: Disable buffer packing. Data
is sent to the printer
when received.
Write Mode option. An HP-
proprietary tag that controls the
TCP PSH flag setting for device-
to-client data transfers.
0 (default): disables this option,
flag not set.
1: all-push option. The push bit
is set in all data packets.
2: eoi-push option. The push bit
is set only for data packets that
have an End-of-Information
flag set.