HP Jetdirect 250M User Manual page 91

IP Address
Subnet Mask
Default Gateway
Domain Name
Primary WINS
Server
Secondary WINS
Server
Syslog Server
Use this field to manually assign the
Internet Protocol address on the HP
Jetdirect print server. The IP address
is a four byte (32-bit) address in the
form "n.n.n.n", where 'n' is a number
from 0 to 255.
An IP address uniquely identifies a
node on a TCP/IP network.
Duplicate IP addresses on a TCP/IP
network are not allowed. For more
information on IP addresses, see
TCP/IP Overview.
If subnetting is used, use this field to
manually assign a subnet mask. A
subnet mask is a 32-bit number that,
when applied to an IP address,
determines which bits specify the
network and subnet, and which bits
uniquely specify the node.
For more information on subnet
masks, see TCP/IP Overview.
Identifies the IP address of a router
or computer that is used to connect
to other networks or subnetworks.
Specifies the name of the Domain
Name System (DNS) domain that
the HP Jetdirect print server resides
in (for example, support.hp.com). It
does not include the host name--it is
not the Fully Qualified Domain
Name (such as
printer1.support.hp.com).
Specifies the IP address of the
primary Windows Internet Naming
Service (WINS) server. The WINS
server provides IP address and name
resolution services for network
computers and devices.
Specifies the IP Address to be used
for WINS if the primary WINS
Server is unavailable.
Specifies the IP address of a host
computer that is configured to
receive syslog messages from the HP
Jetdirect print server. If a Syslog
Server is not specified, syslog
messages are disabled.
For more information, see
Overview.
TCP/IP