HP Jetdirect 250M User Manual page 40

HP Officejet printers and All-in-One peripherals
OfficeJet G-Series
OfficeJet K-Series
If you have one of the printers listed above, run the installer software on the
printer CD to install your network printer. You will not need to run the installer
on the HP Jetdirect CD.
If your printer is not identified above, or you cannot locate your printer
CD, you should:
First, locate your printer's driver. (The instructions in the next section
should help you.)
Then, run the installer from the HP Jetdirect CD.
If the installer asks for the driver, specify the location you found in the
first step.
Note that if you use the HP Jetdirect CD for MFP or All-in-One devices, some
features other than printing (such as scanning and faxing) may not be accessible.
Use the printer CD to get all features.
Note: An HP Web Jetadmin CD-ROM may also be included with selected HP
Jetdirect products. HP Web Jetadmin is a feature-rich printer management tool.
However, it is not required for network printer installation.
Where do I find the printer driver?
At some point late in the installation, the installer software needs to have the
printer driver to complete the installation. So at that point the installer may ask
you where to find the driver. Knowing where to find the driver is usually the most
subtle part of the installation.
If you are running the installer from your printer CD, the installer generally
knows right where to look for the driver -- on the CD. If you are running the
installer from the Jetdirect CD, the installer will probably need you to tell it
where the driver is. Here are a few places you can look: