HP Jetdirect 250M User Manual page 268

59 Firmware download message. Currently downloading firmware to the print server, or the
INCOMPLETE F/W download did not complete properly.
- MUST
DOWNLOAD
5A Firmware download message. Download of firmware is complete. Power cycle the print
TURN PRINTER server.
OFF/ON
83 The server has been shut down because of a configuration change or reset request. This
DISCONNECTING message automatically clears after a few seconds, unless the printer is off line, is in an
FROM SERVER error state, or is servicing another I/O port or another network protocol.
F1 TRYING TO The HP Jetdirect print server is trying to connect to the NetWare server(s). This is a
CONNECT TO normal message. Wait until either the connection is established or another status message
SERVER appears.
Back to Top