Menu Interface - HP Jetdirect 250M User Manual

Specifies the printer job language (PJL) that the print server will use
to send the Jetdirect configuration/status page to the printer.
usb-statpg-
lang
Token Ring Locally Administered Address (LAA). Allows you to
tr-laa reassign the node address on a Token Ring print server. The default
address is the print server's fixed LAN hardware address.
Support Settings
Web
(Read-only parameter) If HP Web JetAdmin discovers this device,
JetAdmin
the URL to access HP Web JetAdmin will be specified.
URL
Web
(Read-only parameter) If HP Web JetAdmin discovers this device,
JetAdmin
the name of the HP Web JetAdmin host will be specified (if known).
Name
support- Typically used to identify the name of a person to contact for support
name of this device.
support- Typically used to specify a phone or extension number to call for
number support of this device.
A web URL address for product information on this device over the
support-url
Internet or an intranet.
tech- A web URL address for technical support over the Internet or an
support-url intranet.

Menu Interface

An optional Menu interface is displayed when you type "menu"
at the Telnet command prompt. The Menu interface eliminates
the need to memorize commands, and provides structured
menu lists for easy access to configuration parameters.
Example: Using the Menu Interface
interface, using the TCP/IP menus as an example.
• From the Main Menu, select and enter a menu number. If
there are submenus, select and enter a submenu number.
• If you want to change a parameter setting, enter "Y" (for
"Yes") when prompted.
• Auto (default): The PDL is auto-detected when the print
server is powered on or after a cold-reset to factory
defaults.
• PCL: Hewlett-Packard Printer Control Language
• ASCII: Standard ascii characters
• HPGL2: Hewlett-Packard Graphics Language (v2)
• PS: Postscript language
illustrates the Menu