HP Jetdirect 250M User Manual page 93

Banner Page
IPX/SPX
The IPX/SPX tab allows you to configure IPX/SPX (Internet
Packet Exchange/Sequenced Packet Exchange) parameters on
the HP Jetdirect print server for operation on a Novell
NetWare or IPX/SPX-compatible network (such as a Microsoft
network). See IPX/SPX Settings
this page.
CAUTION If you are using direct-mode printing over
IPX/SPX on a Microsoft network, do not disable
IPX/SPX.
Note For a Novell NetWare network:
• The embedded web server supports Queue Server Mode
in a Novell Directory Services (NDS) environment only,
• You cannot create the NDS print server, printer, and
queue objects using the embedded web server. To create
these objects, use other available tools or utilities.
Item Description
IPX/SPX Enables or disables the IPX/SPX protocols on the HP Jetdirect print
Enable server. If the checkbox is empty, IPX/SPX is disabled.
Specify the Novell NetWare frame type to be used by the HP
Jetdirect print server on your network. After a frame type has been
configured, all others will be counted and discarded.
IPX/SPX
Frame Type
Specifies whether to enable or
disable printing of an LPD banner
page for print jobs. For HP Jetdirect
external print servers that provide
multiple ports, you can configure
each port. For internal print servers,
only a single port is available (Port
1).
for a description of items on
Table B.3 IPX/SPX Settings
• AUTO (default) senses all frame types and configures the
first one detected.
• EN_8023 limits the frame type to IPX over IEEE 802.3
frames.
• EN_II limits the frame type to IPX over Ethernet frames.
• EN_8022 limits the frame type to IPX over IEEE 802.2
with IEEE 802.3 frames.
• EN_SNAP limits the frame type to IPX over SNAP with
IEEE 802.3 frames.
• TR_8022 limits the frame type to IPX over IEEE 802.2
LLC with IEEE 802.5 frames.
• TR_SNAP limits the frame type to IPX over SNAP with
IEEE 802.5 frames.