HP Jetdirect 250M User Manual page 167

• Windows 2000-In the Local Area Connection
Properties window, click Install. In the Select
Network Component Type window, select Protocol
and click Add to add the Internet Protocol
(TCP/IP).
Follow the instructions on the screen.
• NT 4.0-Click the Add button for each tab and install
the TCP/IP Protocol and the Microsoft TCP/IP
Printing service.
Follow the instructions on the screen.
When prompted, type the full path to the Windows
NT distribution files (you may need your Windows
NT workstation or server CD-ROM).
3 Enter TCP/IP configuration values for the computer:
• Windows 2000-On the General tab in the Local Area
Connection Properties window, select Internet
Protocol (TCP/IP) and click Properties.
• NT 4.0-You may be automatically prompted for
TCP/IP configuration values. If not, select the
Protocols tab in the Networks window and select
TCP/IP Protocol. Then click Properties.
If you are configuring a Windows server, type the IP
address, default gateway address, and subnet mask in the
appropriate spaces.
If you are configuring a client, check with your Network
Administrator to learn whether you should enable
automatic TCP/IP configuration or whether you should
type a static IP address, default gateway address, and
subnet mask in the appropriate spaces.
4 Click OK to exit
5 If prompted, exit Windows and restart your computer for
the changes to take effect.
Configuring a Network Printer for Windows
2000 Systems
Set up the default printer by performing the following steps.
1 Verify that the Print Services for Unix is installed
(required for LPR port availability):