Function Mode; Function Mode ( ) - Canon NP6045 Service Manual

G. Function Mode (
Press the <</>> key to select the screen.
Press the item to highlight, and press the User Mode key (*) to start the operation.
Check to make sure that the machine is in standby state when executing any
operations.
Item
TONER-S Use it for toner supply (at time of installation).
The notation indicates the supply duration in sec:
normally, 7 to 9 min (420 to 540 sec). Check to
make sure that the developing assembly is installed
properly and locked in place; then, press the
key to start toner supply.
Note:
The message "Check the Developer" will appear in response to the first press on
the
press the
COPYRIGHT © 1997 CANON INC.
)
4
Description
key. After making sure that the developing assembly has been installed,
OK key on the touch panel and then the
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Screen 4-1
OK
CHAPTER 10 TROUBLESHOOTING
1/11
Remarks
The operation will stop
automatically.
key.
10-211