Control Display Mode - Canon NP6045 Service Manual

CHAPTER 10 TROUBLESHOOTING
D. Control Display Mode (
Press the <</>> key to select the screen.
Item
FTMP Indicates the surface temperature of the fixing roller.
(output of the main thermistor TH1)
RTMP Indicates the machine internal temperature. (output of
the thermal sensor on the DC controller PCB)
RHUM Indicates the machine internal humidity. (output of the
humidity sensor on the DC controller PCB)
LMP1 Indicates the ON voltage of the scanning lamp
(100/120V model)
LMP2 Indicates the ON voltage of the scanning lamp. (230V
model)
WIRE Indicates a value other than '0' if the primary, pre-
transfer, or transfer/separation charging wire cleaner
stops at a point not its home position. Executing wiring
cleaning for the appropriate wire in user mode will
return the wire cleaner to its home position.
PLMT Indicates '1' when the current value reaches the upper
limit or the lower limit during current control on the
primary charging assembly.
LLMT Indicates '1' when the ON voltage of the scanning
lamp reaches '1' and '2' if it reaches the lower limit.
10-142
COPYRIGHT © 1997 CANON INC.
)
1
Screen 1-1
Description
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
1/9
Remarks
Unit: ÞC
Unit: V
Unit: V
1: Error
0: Normal
0: Normal
1: Error
2: Error