Skipping; Outline; Operation - Canon NP6045 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
G. Skipping

1. Outline

What is termed
one-sided originals by skipping every other original, thereby making efficient use of the
space in the feeding assembly (holding tray assembly and holding tray feeding assem-
bly) not taken up by copy paper.
Skipping is executed automatically under the following conditions:
• The RDF is used to make two-sided copies of one-sided originals.
• The copy paper and the original are A4, B5, or LTR and are fed horizontally.
• Binding mode and cover mode are not used.
• No more than two sets of copies are specified.

2. Operation

The originals are copied in the following sequence:
a. 4 Originals for 2 Sets of Copies
4 (th original), 2, 4, 3, 2, 1, 3, and 1 (st original)
b. 5 Originals for 2 Sets of Copies
5 (th original), 3, 1, 5, 4, 3, 2, 1, 4, and 2 (nd original)
c. 4 Originals for 1 Set of Copies
4 (th original), 2, 3, and 1(st original)
d. 5 Originals for 1 Set of Copies
5 (th original), 3, 1, 4, and 2 (nd original)
Reference:
Skipping may be disabled in user mode.
5-34
COPYRIGHT © 1997 CANON INC.
skipping is a copy sequence used when making two-sided copies of
Space
Copy paper
Figure 5-619
Originals to be skipped
Originals
Photosennsitive
drum
Registration
rollers
Holding tray feeding assembly
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)