Scheduled Servicing Chart; Copier - Canon NP6045 Service Manual

CHAPTER 9 MAINTENANCE AND SERVICING
IV. SCHEDULED SERVICING CHART
Caution:
Do not use solvents/oils other than those specified.
A. Copier
: Clean
Unit
No. 1 through No. 6 mirror
Optical Dust-proofing glass
assembly
Heat absorbing glass
Standard white plate
Reflecting shade
(scanning lamp)
Scanner rail
Optical
Scanner cable
drive
assembly
Charging wire (primary,
pre-transfer, transfer,
separation)
Grid wire (primary)
Charging
Charging wire shield plate
Roller electrode waste toner
receptacle (pre-transfer
charging assembly)
Photosensitive drum
Photosen
sitive
Primary charging anti-
stray sheet
Developing cylinder
Developing
Developing assembly roll
Developing anti-stray sheet
Note 1: Take care not to touch the mirrors and the lenses.
9-6
COPYRIGHT © 1997 CANON INC.
: Replace : Lubricate
Part
Instal-
lation
: Adjust : Check
Interval
every every every
250,000 500,000 750,000
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
every
1,000,000
Use a blower brush;
for the No. 5 mirror,
use the mirror
cleaning tool.
Use alcohol; then,
apply lubricant.
Inspect and adjust
only when servicing
after the first 250,000
copies.
Use solvent.