5.
Positioning the Mirror
When you have installed the scanner drive cable, be sure to perform the following
steps to adjust the mirror position:
1) Move the No. 1 mirror mount and the No. 2/No. 3 mirror mount to the left.
2) Set the mirror positioning tool (front, rear; FY9-3011) as indicated.
3) Tighten the two screws on the clamp used to fix the scanner drive cable to the No. 1
mirror mount.
4) Remove the tool.
COPYRIGHT © 1997 CANON INC.
Figure 3-511
Figure 3-512
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
3-23