Charging Assembly - Canon NP6045 Service Manual

No.
9 Disconnect the connector, and
loosen the screw; then, while moving
the charging assembly fixing in the
direction of the arrow (upper right),
fix it in position with a screw.
Using alcohol, clean the primary

charging assembly.

10 Disconnect the connector, and
remove the screw. Take out the pre-
transfer charging assembly. Using
alcohol, clean
charging assembly.
11 Disconnect the four connectors, and
remove the two screws. (You will
remove the drum fixing screw in step
7.)
Caution:
Remove the harness from the
edge saddle.
COPYRIGHT © 1997 CANON INC.
Work
the pre-transfer
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
Checks/remarks
Connector
Screw
Primary charging assembly
Screw
Cleaner screw retainer
Connectors
Screw
Drum fixing screw
Connector
Screw
8-11