Removing The Rear Cover; Sliding Out The Hopper Assembly - Canon NP6045 Service Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS

4. Removing the Rear Cover

1) Remove the nine screws

5. Sliding Out the Hopper Assembly

1) Open the front door, and open the hopper cover
screws and the connector cover
hopper to the front, and turn it.
Caution:
When installing the hopper assembly, be sure to check that the connector is
connected.
7-16
COPYRIGHT © 1997 CANON INC.
, and remove the rear cover
Figure 7-408
, and disconnect the connector; then, slide the
Figure 7-409
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
. Remove the three mounting