Cleaning The Mirror (No. 5 Mirror); Installing The Light-Blocking Belts - Canon NP6045 Service Manual

5. Cleaning the Mirror (No. 5 mirror)

1) Remove the copyboard glass.
2) Remove the lens hood.
3) Remove the mirror guide plate.
4) Move the lens stage in Enlarge direction.
5) Remove the screw, and remove the mirror cleaning tool.
6) As shown, butt the mirror cleaning tool
mirror by moving the tool in the direction of the arrows. (At this time, take care so that
the No. 4 mirror will not come into contact with the cleaning tool or your fingers.)

6. Installing the Light-Blocking Belts

COPYRIGHT © 1997 CANON INC.
Figure 10-213
Light-blocking belt 1
Light-blocking belt 2
Figure 10-214
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
against the No. 5 mirror, and clean the
Light-blocking belt 3
Light-blocking belt 4
10-13