Removing The Registration - Canon NP6045 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
5) Disconnect the connector
the fixing/feeding unit.
3. Removing the Registration Roller (upper rubber roller)
1) Loosen the two set screws
rear.
2) Remove the spring
5-80
COPYRIGHT © 1997 CANON INC.
, and remove the registration feeding assembly
Figure 5-851
on the stopper of the electromagnetic clutch at the
, E-ring , spacer
Figure 5-852
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, bushing , and bearing
from
.